L-IP Router CEA-709

For an easy integration on the IP side, the L-IP provides a Web interface, that can also be used via an encrypted HTTPS connection. Through this Web interface, the built-in CEA-852 Configuration Server can be switched on and configured. The Configuraton server is thus always available online in the network and no additional software tool is required. 

Besides the router functionality, the L-IP Routers provide outstanding capabilities for network diagnostic and analysis. They allow the LPA (LOYTEC Protocol Analyzer) transparent access to the twisted pair channels (TP/‌FT-10 or TP/XF-1250) on the device via Ethernet/‌IP – via a local Intranet or the Internet. This allows a fast analysis of data communication and reduces time-consuming troubleshooting. All system registers are available as OPC XML‑DA and OPC UA data points.

The L-IP Routers are equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (building LAN) where the standard building automation protocols are present (e.g. IP-852). These devices also feature firewall functionality, of course to isolate particular protocols or services between the ports. The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

 Features

L-IP Router CEA-709 Products
LIP-1ECTC
	CEA-709/IP-852 Router, 1 x TP/XF-1250, 2 x Ethernet Port (IP-852)
	Start quote request Documentation and Software
	3D View
LIP-3ECTC
	CEA-709/IP-852 Router, 1 x TP/FT-10, 2 x Ethernet Port (IP-852)
	Start quote request Documentation and Software
	3D View
LIP-13ECTC
	CEA‑709/IP‑852 Router, 1 x TP/FT‑10, 1 x TP/XF-1250, 2 x Ethernet port (IP‑852), expected availability Q3 2024
	Start quote request Documentation and Software
	3D View
LIP-33ECTC
	CEA-709/IP-852 Router, 2 x TP/FT-10, 2 x Ethernet Port (IP-852)
	Start quote request Documentation and Software
	3D View
LIP-3333ECTC
	CEA-709/IP-852 Router, 4 x TP/FT-10, 2 x Ethernet Port (IP-852)
	Start quote request Documentation and Software
	3D View
LPOW-2415B
	Power supply unit with power connector 24 VDC, 15 W
	Start quote request Documentation and Software
	3D View
LWLAN-800
	Wireless LAN Interface IEEE 802.11bgn
	Start quote request Documentation and Software
	3D View
LT-03
	Network terminator for 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x Network Access Connector RJ45
	Start quote request Documentation and Software
	3D View
LT-13
	Network terminator for: 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x TP/XF-1250 (bus toplogy only)
	Start quote request Documentation and Software
	3D View
LT-33
	Network terminator for 2 x TP/FT-10 or TP/LPT-10 (bus or free topology)
	Start quote request Documentation and Software
	3D View