The L-PAD / L-VIS / L-WEB Configurator is used to configure the L-VIS Touch Panel and the LPAD-7 Programmable Touch Panel and to build graphical pages for L-VIS / L-PAD or LWEB-802/803 pages for L-WEB system or L-STUDIO on PC or handhelds.
L-PAD / L-VIS / L-WEB Configurator (64-bit)
We are continuously improving our product portfolio and are delighted to present several new LOYTEC devices right before the turn of the year. These are the changes that await you put in a nutshell. Further information can be found in the product specification in each datasheet.
The L‑INX Automation Servers LINX‑153 and LINX‑154 are powerful, programmable automation stations, which can be programmed by L‑STUDIO. The L‑INX Automation Servers can host user specific graphical pages and can integrate physical I/ Os through L‑IOB I/ O Modules via LIOB‑Connect, LIOB‑FT, or LIOB‑IP.
The L‑INX Automation Servers LINX‑215 are programmable automation stations with integrated graphical visualization for central automation tasks in BACnet and LonMark networks.
The LIOB‑586/588/589 I/ O Controllers are IP-enabled, compact, programmable automation stations for LonMark Systems and BACnet/ IP networks with physical inputs and outputs and integrated graphical visualization.
The LDALI‑PLC4 controllers are powerful, freely programmable lighting controllers, which can be programmed by L‑STUDIO. With Alarming, Scheduling, Trending and e-mail notification (AST™) the LDALI‑PLC4 controller is a perfect solution for DALI lighting systems with application requirements not covered by the standard application of the non-programmable L‑DALI controllers.
The LMPBUS-804 connects up to four MP-Bus channels with up to 64 MP-Bus slaves to the USB port of the L‑INX Automation Server, L‑ROC Controller or L‑GATE Gateway Controller.
LIP-1ECTC LIP-3ECTC LIP-33ECTC NIC709-IPxE100C Firmware for the L-IP series "C" models LIP-1ECTC, LIP-3ECTC, LIP-33ECTC, LIP-3333ECTC as well as the network interfaces NIC709-IP3E100C and NIC709-IP1E100C. They come with two Ethernet ports and the configuration setup can be done easily via the jog dial and LCD. These devices also support enhanced security features such as a built-in firewall, and a secure Web interface even during the installation process using HTTPS with self-signed or installable CA certificates. By configuring separate IP networks on the two Ethernet ports, the CEA-852 network can be entirely isolated from the configuration interface.
For perfect integration into building management software such as the LWEB-900 by LOYTEC, the L-IP series “C” models offers an embedded OPC UA server with certificate authentication, which exposes important operational parameters as OPC tags. For enhanced maintainability by IT departments, these models provide the same data also through an SNMP server. Together with the LWLAN-800 adapter, these L-IPs can operate CEA-852 on the WLAN. By setting up an access point on the Ethernet network, the device can be used to distribute FT channels on a wireless network.
The new L-STAT Firmware for the Room Operator Panels / Network Thermostats LSTAT-8xx-Gx-Lx is ready.
The L-STAT is a network thermostat with a modern, minimalistic look that fits any interior design. It is directly connected to a LOYTEC controller with a Modbus interface such as L-INX, L-ROC, LIOB-AIR or L-GATE. The L-STAT’s internal sensors measure temperature, humidity, dew point, occupancy, and CO2 level. Eight capacitive touch buttons are used to cycle through sensor values, display parameters, and adjust set points.
LINX-xxx LGATE-xxx LROC-xxx LIOB-xxx LIP-ME20x LDALI-xxx Firmware for all L-INX Automation Servers, L-GATE Gateways (for BTL-certified LGATE-900 devices start from serial no. 009714-xxxxxxxxxxxx), L-ROC Room Controllers, LIP-ME20x Routers, LIOB-AIRx Controllers, LIOB-xxx Controllers and L-DALI Controllers.
This video presents several new features of the new firmware release.
0:12 iCalendar Scheduler
2:54 BACnet/SC
4:40 Improvements of the Web Interfaces
5:39 Node-RED 3.0
6:23 Edge Trigger of Trends
6:58 New Modbus Dialogue